See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
A ball is in contact with a plane, and a lubricant separates the two surfaces to decrease friction during their relative motion. To avoid wear, the lubricant film thickness should be higher than the surface roughness. The goal of this paper is to show how it is possible to solve ... Read More
In this work the solution of the structural problem obtained by mean of the velocity approach is presented. More in detail the balance and constitutive equations are expressed in Eulerian form, the mesh is not material. The approach is general, is suitable both for material boundary or ... Read More
Numerical homogenization is based on the use of finite elements for the description of average properties of materials with heterogeneous microstructure and composites. The Representative Volume Element (RVE) of a masonry is solved with COMSOL Multiphysics®. It consists of linearly ... Read More
To understand origins and consequences of drying phenomenon during composting, a compositional drying model of a partially water-saturated porous media coupled with biodegradation has been developed. The different simulations carried out under COMSOL Multiphysics demonstrate the ability ... Read More
The Helmholtz Coil generates a uniform magnetic field. The commercially available large-size Helmholtz coils prove to be very expensive. This paper describes the economical method of designing and construction of a Helmholtz coil. COMSOL Multiphysics AC/DC Module simulated results and ... Read More
Using modeling software such as COMSOL Multiphysics during the design phase, an approach called “simulation-led design”, allows ideas to be both inspired and validated by the use of simulations. Then, using simulations after the product is designed can shorten the prototype-testing ... Read More
This paper deal of the forming process applied to the thermoplastic composites. A new thermoforming process that uses rubber particles collection as flexible mould was presented and numerically modeled. A characterization of the rubber in particles form was previously performed to value ... Read More
Pressure-driven air flow is directed over the microfluidic cavity induces circulating fluid motion in the cavity. Analyte contained in the air stream is absorbed into the cavity, mixes with the nanoparticles as a result of the circulating cavity flow. Therefore, the nanoparticles ... Read More
Cu-Nb multilayer nanocomposite has prospective applications in nuclear industry because of its ability to self-heal from radiation damage. The goal of the study is to find a suitable joining method for the composite to produce industrial-scale pieces, free of defects threatening the ... Read More
This contribution is devoted to the mathematical modeling of the AC electroosmotic micropumps in COMSOL Multiphysics and Matlab. The mathematical model involves the microchannel surroundings and several AC-voltage driving modes. The weak form has been used for handling singularities and ... Read More