See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Experiments have been conducted with water at velocities from ~0.015-0.77 m/s to determine the permeability of 50 mm thick commercially available 30, 40, 50 and 80 Pores Per Inch (PPI) Ceramic Foam Filters (CFF) used for liquid metal filtration. Measurements were made using two different ... Read More
The micro-nanometer sized droplets have tremendous applications in bio-diagnostics, polymerization processes etc. In this work, we numerically investigate the droplet formation process of silicone oil in aqueous solution in a MFF device. A conservative level-set method is adopted to ... Read More
In the Andean region of Southern Peru, poverty and climate are extreme: at 4000mt asl, insolation is among the highest in the world but the temperature varies more than 30 degrees between day and night. At the community of Livitaca (Cuzco), the association “Ingegneria Senza Frontiere” is ... Read More
It is frequently necessary to electrically heat gases; a convenient geometry is the familiar tube-in-shell heat exchanger, where the tube side is modified for electrical heater-rods, and the baffled shell side contains the flowing gas, as indicated in Fig. 1. However, this modification ... Read More
Respect to the previous approaches, in this communication the electrochemical and chemical kinetics as well as the transport phenomena, were modelled at very high level of theory, taking into account all the parameters affecting the galvanic process, including turbulent convection ... Read More
Simulations with COMSOL Multiphysics were performed, in order to analyze the gas flow patterns during the induced ignition of gases. Simplified calculations were performed. The ignition spark was assumed to have a temperature of 2000 K and a laminar flow was selected. 2D calculations ... Read More
The modeling of sublimation form a rotating cylinder of solid naphthalene in a confined vessel has been performed by coupling the model of incompressible Newtonian fluid flow with the model of the dilute solutions. Preliminary a 2D axisymmetric system with swirl flow function for laminar ... Read More
Polishing is one of the oldest finishing processes. However, exposure to emissions of crystalline silica dust is high. Some toxicological studies have identified this pollutant as responsible for a particular type of lung cancer, silicosis. Operational solutions are needed for reducing ... Read More
Single stage centrifugal pumps are widely used in several engineering fields such as: room conditioning, energetic cycles, automotive industry, home care, etc. Thus, the possibility of simulate their behaviour, in terms of pressure increase and mass flow rate, is helpful in reducing ... Read More
Geothermal heat production from deep reservoirs (5000-7000 m) is currently examined, not only in Germany. Our reference set-up consists of two pipes within a single borehole: one for pumping. We examine a design, where a single borehole splits into two legs at a certain depth. The two ... Read More