See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Gas lubricated bearing has been developed for high accuracy in precision machines and equipments. Gas lubricated bearings are mainly two types: aerostatic bearings, which require a feed of pressurized gas for their operation, and aerodynamic bearings, which generate their own internal ... Read More
Sodium is used as a coolant in Fast Breeder Reactors. Eddy Current Flowmeter (ECFM) is used for measurement of sodium flow in the primary pump and at the outlet of the subassemblies. Eddy Current Flowmeter (ECFM) works on the principle of change in the magnetic field profile due to ... Read More
Permanent Magnet Flowmeter (PMFM) is a non invasive device, which is used to measure the flow of electricallyconducting sodium in Fast Breeder Reactor Circuits. PMFM works on the principle of generation of motional EMF by magnetic forces exerted on the charges in a moving conductor. In ... Read More
In this paper a finite element method(FEM) study of a surface acoustic wave (SAW)device excited by electrostatic coupling method is performed by using COMSOL Multiphysics. We have modeled a Rayleigh wave type SAW device by choosing YZ Lithium niobate as the substrate. The effect of ... Read More
The effects of electric fields on combustion flames have been studied by using several types of experimental techniques as well as few numerical methods. The flame is influenced by the electric field mainly due to the charges present as a result of chemical reactions that take place in ... Read More
Computational models of biological systems are becoming more and more common in medical research areas. Evidence of this can be found by examining the number of articles containing the term “finite element” in the expansive National Institutes of Health (NIH) digital research archive ... Read More
Finite element models using COMSOL Multiphysics and MATLAB were developed to solve the problem of stress distribution interior homogeneous, isotropic, incompressible elastic solid material under known vertical external compression with a rectangular contact surface. Moreover, comparison ... Read More
Increasing attention has been paid to application of the quartz crystal microbalance with dissipation (QCM-D) sensor for monitoring biomolecular interactions. This paper focuses on a practical application of protein-protein binding affinity measurement at low concentrations and minimal ... Read More
Heat conduction through a slab, 0 ≤ x ≤ W is one dimensional. However, if one of the edges, say x=0, is rough the conduction will be two dimensional. The two dimensionality varies with the correlation length with a maximum at a length approximately 10% of the slab width. ... Read More
This paper develops a computational model for determining the total damping coefficient for a unit cell of a MEMS microscale device containing a repetitive pattern of holes. The basic cell of the microstructure is approximated by an axi-symmetric domain and the velocity and pressure ... Read More
