COMSOL Multiphysics®
  • Electromagnetics
  • Structural & Acoustics
  • Fluid & Heat
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos

Clear All

Duration: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 7:37

LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module. Chapter 1 includes steps: adding physics, building ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:29

Modeling the Focusing Stage of an Electrokinetic Valve

In this video, we simulate an electrokinetic valve. Using the Transport of Diluted Species, Creeping Flow, and Electric Currents interfaces, this video shows the complete analysis of a typical ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

First
Previous
1–15 of 123

Duration: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 7:37

LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 1 includes steps: adding physics, building ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:29

Modeling the Focusing Stage of an Electrokinetic Valve

In this video, we simulate an electrokinetic valve. Using the Transport of Diluted Species, Creeping Flow, and Electric Currents interfaces, this video shows the complete analysis of a typical ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 7:37

LiveLink™ for PTC® Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC® Pro/ENGINEER®.

Duration: 7:47

Molecular Flow in an Ion-Implant Vacuum System Chapter 1

This two-chapter tutorial shows how to model an ion implantation system using the Molecular Flow interface available in the Microfluidics Module.

Chapter 1 includes steps: adding physics, building ...

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 7:10

Pressurized Orthotropic Container

In this video, a container made of rolled steel is subjected to an internal overpressure. As an effect of the manufacturing method, one of the three material principal directions—the out-of-plane ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 3:25

Cooling of an Injection Mold

INJECTION MOLDING: Cooling of a steering wheel injection mold, including pipe flow and heat transfer in cooling channels. The 1D cooling channels are fully coupled to the heat transfer simulation of ...

Duration: 8:29

Modeling the Focusing Stage of an Electrokinetic Valve

In this video, we simulate an electrokinetic valve. Using the Transport of Diluted Species, Creeping Flow, and Electric Currents interfaces, this video shows the complete analysis of a typical ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

First
Previous
1–15 of 123