Video Gallery
Featured Videos
Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes
This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...
Modeling Chemical Applications
The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...
Creating 2D Models from Cross Sections of 3D Geometries
COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...
Modeling Mechanical Applications in COMSOL Multiphysics
COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...
Deep Excavation Simulation Tutorial
This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...
Modeling Computational Electromagnetics with the AC/DC Module
With COMSOL Multiphysics and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and ...
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...
Particle Tracking in a Laminar Static Mixer
This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...
How to Export STL Files from COMSOL for 3D Printing
COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...
Structural Mechanics: The Rigid Connector Feature
When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...
Duration: 12:36
Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes
This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...
Duration: 8:36
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...
Duration: 2:06
Modeling Chemical Applications
The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...
Duration: 4:23
Creating 2D Models from Cross Sections of 3D Geometries
COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...
Duration: 2:54
Modeling Mechanical Applications in COMSOL Multiphysics
COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...
Duration: 12:00
Deep Excavation Simulation Tutorial
This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...
Duration: 20:06
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...
Duration: 7:10
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.
In this step-by-step instructional video, you will ...
Duration: 2:42
Modeling Computational Electromagnetics with the AC/DC Module
With COMSOL Multiphysics and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and ...
Duration: 13:45
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...
Duration: 10:51
Particle Tracking in a Laminar Static Mixer
This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...
Duration: 6:10
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...
Duration: 1:09
How to Export STL Files from COMSOL for 3D Printing
COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...
Duration: 1:53
Structural Mechanics: The Rigid Connector Feature
When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...
Duration: 1:49
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...
Duration: 12:36
Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes
This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...
Duration: 8:36
Simulating a Magnetic Lens: Setting up and Solving the Model
The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...
Duration: 2:06
Modeling Chemical Applications
The application of modeling to chemical engineering is a cost-efficient way to explore new designs of systems and processes. COMSOL has been developing its capabilities with the chemical processes ...
Duration: 4:23
Creating 2D Models from Cross Sections of 3D Geometries
COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...
Duration: 2:54
Modeling Mechanical Applications in COMSOL Multiphysics
COMSOL Multiphysics® is your ideal software solution for modeling mechanical applications and analyzing the multiple interacting physics affecting them. Structural mechanics, nonlinear material ...
Duration: 12:00
Deep Excavation Simulation Tutorial
This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...
Duration: 20:06
Ercan Dede: Multiphysics Modeling Solutions for Advanced Vehicle Research & Development
Ercan Dede currently works as a Principal Scientist for the Toyota Research Institute of North America, where his research involves the multiphysics simulation and optimization of electromechanical ...
Duration: 7:10
Performing a Multibody Analysis on a Double Pendulum
You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.
In this step-by-step instructional video, you will ...
Duration: 2:42
Modeling Computational Electromagnetics with the AC/DC Module
With COMSOL Multiphysics and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and ...
Duration: 13:45
Shell and Tube Heat Exchanger Model Tutorial
This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...
Duration: 10:51
Particle Tracking in a Laminar Static Mixer
This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...
Duration: 6:10
Thermal Stress Analysis of a Turbine Stator Blade
Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...
Duration: 1:09
How to Export STL Files from COMSOL for 3D Printing
COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...
Duration: 1:53
Structural Mechanics: The Rigid Connector Feature
When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...
Duration: 1:49
Structural Mechanics: Adding Thermal Stress to a Model
Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...