Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Wrong sensitivity with deformed geometry in Magnetic field no current module

Posted Mar 11, 2017, 7:23 a.m. EST Low-Frequency Electromagnetics, Geometry, Mesh Version 5.2a 1 Reply

Andrey Ivanov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello!
I have a simple model with
1 Reply Last Post Mar 13, 2017, 1:03 p.m. EDT
Nirmal Paudel Tribhuvan University/Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Mar 13, 2017, 1:03 p.m. EDT
Hi Andrey,

The following example should be useful here:
www.comsol.com/model/axial-magnetic-bearing-using-permanent-magnets-14367

Best Regards,
Nirmal
Hi Andrey, The following example should be useful here: https://www.comsol.com/model/axial-magnetic-bearing-using-permanent-magnets-14367 Best Regards, Nirmal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content