Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Coupling of 3D to 2D model

Posted Apr 1, 2017, 9:10 p.m. EDT Modeling Tools & Definitions 1 Reply

Mohand Alzuhiri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a 3D electromagnetic model to calculate the EM heating inside a sample and I am trying to couple this model to another 2D model to excite another process. i have created a work plane and imported the cross section to a 2D coponent but i dont know how to transfer the electromagnetic losses values to the new 2D geometry to start th new simulation in the 2D geometry.
1 Reply Last Post Apr 1, 2017, 11:53 p.m. EDT
Mohand Alzuhiri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Apr 1, 2017, 11:53 p.m. EDT
The problem has been solved by using linear extrusion
www.comsol.com/blogs/part-2-mapping-variables-with-general-extrusion-operators/
Thanks
The problem has been solved by using linear extrusion https://www.comsol.com/blogs/part-2-mapping-variables-with-general-extrusion-operators/ Thanks

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content