Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Different values for contour plots between 2D and 3D on the same surface
Posted Feb 28, 2011, 5:52 a.m. EST Version 4.0a 1 Reply
Please login with a confirmed email address before reporting spam
I have simulated a PEM fuel cell and I am plotting the contours of the oxygen molar concentration on the interface between the cathode catalyst layer and the membrane.
For the same surface the maximum and minimum values for the contours in the 2D and 3D are different which does not make sense, could you please tell me why?
Also, what way is there to compare contour plots from different simulation? I tried taking an image snapshot but the contour colors are reversed. The maximum becomes blue and the minimum becomes red!!
I cannot upload the file. It is giving me a "file size" error, probably the file is too big.
Thank you very much
Hello HNASSAR
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam