Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Inductance of an FE Model

Posted Jul 4, 2017, 11:31 a.m. EDT Low-Frequency Electromagnetics Version 5.3 0 Replies

Felix Joyce
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am trying to do a transient analysis of a 3D FE Model by coupling Magnetic Fields, Electrical Circuits and Electric Currents. I have a capacitor with an initial voltage and a small resistor in my circuit and I am trying to get the waveform of the pulse as I discharge the capacitor in a time-dependent study.

However, since there is no inductance in the circuit the pulse doesn't have a rise time but I want the pulse to have a rise time since the FE model has an inductance. How can I make the simulation include the inductance of the FE model as it calculates the current density so that the current density starts from 0 A/m^2 at 0 s.

Thanks,
Felix
0 Replies Last Post Jul 4, 2017, 11:31 a.m. EDT
COMSOL Moderator

Hello Felix Joyce

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content