Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Rainfall Infiltration boundary condition

Posted Mar 22, 2011, 1:29 p.m. EDT Fluid & Heat Version 4.0a, Version 4.3 1 Reply

Charles Ly
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am modeling the movement of groundwater in an area in rainy season, and have got a problem regarding defining the land surface's boundary condition. Because the rainfall amount in this area is considerably high, so need to be taken into account. At present, I already collected data on hourly precipitation and infiltration rate, but don't know how to transfer these data into COMSOL. Could anyone help? Thanks.
1 Reply Last Post Mar 22, 2011, 1:31 p.m. EDT
Charles Ly
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 22, 2011, 1:31 p.m. EDT
forgot to mention, my model is in 2D
forgot to mention, my model is in 2D

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content