Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Directional antenna transmission in 2D

Posted Jan 14, 2018, 10:57 a.m. EST Low-Frequency Electromagnetics, Ray Optics, RF & Microwave Engineering Version 5.3 1 Reply

Zahed Hossain
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

What is the simplest way to do a 2D simulation for a directional antenna? Also how can we check the transmiision through different materials?

Thanks in advance, ZH

1 Reply Last Post Jan 14, 2018, 1:43 p.m. EST
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Jan 14, 2018, 1:43 p.m. EST

You should take a look at the many examples provided by Comsol in the Applications library. And I've attached one of my own simple examples, which you can modify. Good luck.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
You should take a look at the many examples provided by Comsol in the Applications library. And I've attached one of my own simple examples, which you can modify. Good luck.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content