Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Pumping fluid by external loading

Please login with a confirmed email address before reporting spam

Hello, I am modeling a pipe which is very flexible, a displacement is applied on a strip of the walls (to pump the fluid). If the two ends of the pipe are connected to the same tank, and the whole tube is inundated in liquid. What should be the boundary condition I should use at the inlet and exit of the tube? I am modeling it as a axisymmetry 2D problem. Thanks


0 Replies Last Post Jun 14, 2018, 3:03 p.m. EDT
COMSOL Moderator

Hello Mohamed Ibrahim

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.