Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Deformation Animations in COMSOL 4.0a

Posted Jun 7, 2011, 12:42 p.m. EDT Acoustics & Vibrations, Results & Visualization, Structural Mechanics Version 4.0a 0 Replies

Michael Dobson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am looking for help to animate the deformations at a boundary, using COMSOL 4.0a.

I have been doing it with COMSOL 3.5a, following the instructions I saw here:

www.comsol.com/showroom/documentation/model/2197/

and

www.comsol.com/showroom/documentation/model/482/


In COMSOL 3.5a it was very simple. In the boundary tab of the postprocessing menu, select the 'Boundary' check box, then select the 'Deformed Shape' check box. Then I could animate the deformation from the results of whatever solutions I had.

COMSOL 4.0a is different and I have not been able to get this animation to work.

Any help would be greatly appreciated.
0 Replies Last Post Jun 7, 2011, 12:42 p.m. EDT
COMSOL Moderator

Hello Michael Dobson

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content