Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Creating separate subdomains
Posted Mar 11, 2019, 8:15 a.m. EDT Fluid & Heat, Computational Fluid Dynamics (CFD), Geometry Version 4.0a 0 Replies
Please login with a confirmed email address before reporting spam
Hi,
I'm fairly new to comsol and am currently having a bit of trouble creating two separate domains within the same geometry for a fluid flow problem. I'm working with a simple two dimensional geometry of a reaction tank. Within this geometry is the rotating domain (impeller region) and the stationary domain (tank walls). These are the two separate domains I want.
I've attempted to "cut" the outline of the rotating geometry out of the stationary geometry and then import and insert the rotating geometry into the gap left behind. I had hoped this would create two non-oveplapping domains but when I went to mesh the geometry, there were several operlaps and gaps between the two domains.
Does anybody know how to create two non-overlapping domains in a 2D geometry without this happening ?
Thanks, Dónal
Attachments:
Hello Donal Murphy
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.