Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem: Material, Boundary Conditions, etc. change during Parametric Sweep
Posted Apr 9, 2019, 3:17 a.m. EDT RF & Microwave Engineering, Parameters, Variables, & Functions, Studies & Solvers Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
Hello there
I try to make a Parametric Sweep over the width/depth of some material elements(rectangles in different materials). Unfortunately, the sweep stops all the time and everything has changed: The periodic boundary conditions have shifted to the inner edges, the materials have been swapped, the mesh settings of the different rectangles have swapped, etc. How can I avoid this?
I'm using Comsol 4.3, RF modul, Frequency Domain
Hello Marcel Stucki
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.