Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Differerence between multiturn coil Bc and coil Domain Bc

Posted Oct 18, 2011, 6:58 a.m. EDT Low-Frequency Electromagnetics Version 4.1 0 Replies

Pranith Tummala
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am going to simulate two solenoids in 2d axissymmetry. I am sending 1V AC to one solenoid and i would like to calculate induced voltage, mutual inductance and coupling coefficient. I did it for single turn coils by using single turn coil domain or coil group domain Bc's both are working fine. I verified results with theoretical results. I have a problem when both coil of having 10 turns. Now Which coil domain bc i have to use. I am confusing with multiturn coil domain
bc because this one useful only for tightly wounded coils here i am using solenoids. I am triyng to simulate same solenoids in 3D but i can't able to mesh it. Can anybody have related material regarding solenoids simulation.
I am attaching my model files. Thanks in advance.

regards,
Pranith Thummala
0 Replies Last Post Oct 18, 2011, 6:58 a.m. EDT
COMSOL Moderator

Hello Pranith Tummala

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content