Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Contact Impedance

Posted Oct 25, 2011, 11:52 a.m. EDT Low-Frequency Electromagnetics Version 4.2 0 Replies

Fabiola Alonso
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am building a model to compare the electric field of two different electrodes, one is current controlled and the other voltage controlled. Both electrodes have 4 contacts but only one is active, i.e. 3 are set to floating potential and one to either voltage or current.
My problem is that I need to consider the impedance of the active contact and at the same time set a voltage (or current) for that contact itself.
Does somebody have any idea? Thanks in advance!

Attachments:

0 Replies Last Post Oct 25, 2011, 11:52 a.m. EDT
COMSOL Moderator

Hello Fabiola Alonso

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content