Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Define hyper-elastic material model with Shell

Posted Dec 11, 2011, 11:25 a.m. EST Version 4.2 1 Reply

Iftah Nudel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

When using the Solid Mechanics Physics there is a possibility of using hyper-elastic material model. Is it possible to do it also with Shell?

thx
1 Reply Last Post Dec 11, 2011, 12:20 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 11, 2011, 12:20 p.m. EST
Hi

if it is not specifically written up in the doc, then it's probably not implemented. Shell elements are simplifications from solid so I'm not that astonished if it's not also there with advanced features

--
Good luck
Ivar
Hi if it is not specifically written up in the doc, then it's probably not implemented. Shell elements are simplifications from solid so I'm not that astonished if it's not also there with advanced features -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content