Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Quadratic elements for velocity in COMSOL 4.4

Posted Jun 16, 2020, 11:46 a.m. EDT Fluid & Heat, Heat Transfer & Phase Change Version 4.4 1 Reply

Kunle Heat transfer, Computational Fluid Dynamics
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to simulate free convection in a water glass and I am required to select Discretization section in the Model Builder. But this is not available in the Model Tree for COMSOL 4.4 as stipulated in the COMSOL 5.3a sample file.

Where can I locate this node/settings in COMSOL 4.4?

Thanks

1 Reply Last Post Jun 16, 2020, 12:36 p.m. EDT
Alexandre Arsenault
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Jun 16, 2020, 12:36 p.m. EDT

Hello,

Under model builder, click on the eye icon and check "Discretization"

Cheers,

Alex

Hello, Under model builder, click on the eye icon and check "Discretization" Cheers, Alex

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content