Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Parametric Sweep of Free Free beam yields no displacement?
Posted Oct 14, 2020, 6:01 p.m. EDT Version 5.2a 0 Replies
Please login with a confirmed email address before reporting spam
Hello,
I am attempting to do a Frequency Domain evaluation of a free free beam with a point load of 100 N. I ran a parametric sweep from 0 to 6 kHz with a 10 Hz step size. I attempted to do a 1D plot for Total displacement in the Y axis vs Frequency in the X axis and I was only getting a single point to plot and not the entire set of displacements against the the entire set of frequency evaluations. So I did a volume maximum with respect to displacement and I got the entire range for displacement and frequency to plot. However it seems that all of my displacement values are 0.0000000000 and I don't understand how that is possible. Any help would be much appreciated
Thanks
Hello Aaron Misla
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.