Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

building an equilibirium in chemical reaction engineering

Posted Apr 3, 2012, 6:00 a.m. EDT Chemical Reaction Engineering Version 4.2a 0 Replies

Rehab Al Botros
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have been trying to build up an equilibirium using the comsol 4.2a chemical reaction engineering. I am adding the following reaction ca+so=caso, then when the species are generated I define their mass and charge, when I tryed to solve a very simple model, I found the resulting species concentrations similar to the initial concentrations no matter how much I chang them, which means that the model is not doing anything and there is no equilibirium in the solution. Please anyone has done this before could you help me out?

Thanks
Rehab
0 Replies Last Post Apr 3, 2012, 6:00 a.m. EDT
COMSOL Moderator

Hello Rehab Al Botros

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content