Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
interpolation function problem
Posted Jun 8, 2012, 9:36 a.m. EDT Heat Transfer & Phase Change, Materials Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Dear all,
I got an issue I need solve very quick but I don't how to maage that problem.
Using heat transfer module I built up a modell only containing conductive heat transport. I have a quite large, 310 km × 280 km × 160 km block, the model is time dependent. As initial temperature values I built up a T(x,y,z) file, with four columns (x,y,z,T). The import of this file (10 MB) works well, comsol immiadetaly recognizes, it's 3 dimensional data, but after clickin on solve I got always the same error message:
mod1/sol1
Failed to load interpolation function file.
I sucessfully solved problems on the same geometry with smaller data files (around 1 MB), but it seems comsol can't handle a data file containint more than 311.000 data points.
Questions:
-Is there any data file limit using interpolation functions?
-If not, what could be the problem?
-How to solve it?
Thanks for all,
Donat
I got an issue I need solve very quick but I don't how to maage that problem.
Using heat transfer module I built up a modell only containing conductive heat transport. I have a quite large, 310 km × 280 km × 160 km block, the model is time dependent. As initial temperature values I built up a T(x,y,z) file, with four columns (x,y,z,T). The import of this file (10 MB) works well, comsol immiadetaly recognizes, it's 3 dimensional data, but after clickin on solve I got always the same error message:
mod1/sol1
Failed to load interpolation function file.
I sucessfully solved problems on the same geometry with smaller data files (around 1 MB), but it seems comsol can't handle a data file containint more than 311.000 data points.
Questions:
-Is there any data file limit using interpolation functions?
-If not, what could be the problem?
-How to solve it?
Thanks for all,
Donat
1 Reply Last Post Jun 8, 2012, 9:52 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
for me you should contact "support" they are the only ones having the possibility to reply correctly
--
Good luck
Ivar
for me you should contact "support" they are the only ones having the possibility to reply correctly
--
Good luck
Ivar