Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Errata in User Guides, Version 4.2a
Posted Jun 13, 2012, 4:07 p.m. EDT Chemical Reaction Engineering Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I found a small erratum in "Chemical Reaction Engineering Module User's Guide". At page 49, the bulk concentration unit should be (mol/m^3) instead of "mol/m^2".
Page 140, Equation 3.39, the sign need to be revised. The right hand side must be (+) instead of (-).
Page 141, Equation 3.40 missed the "convection term" of the left hand side.
Best regards,
Dao Trinh
I found a small erratum in "Chemical Reaction Engineering Module User's Guide". At page 49, the bulk concentration unit should be (mol/m^3) instead of "mol/m^2".
Page 140, Equation 3.39, the sign need to be revised. The right hand side must be (+) instead of (-).
Page 141, Equation 3.40 missed the "convection term" of the left hand side.
Best regards,
Dao Trinh
1 Reply Last Post Jun 15, 2012, 2:23 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
In "Introduction to Electrodeposition module", page 25, Equation 3, Phi(s) is electric potential or electronic potential ?