Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to retrieve the convergence plots after closing and (re)opening a model file?

Please login with a confirmed email address before reporting spam


Hello dear colleagues,

a small question: I closed (after saving) my simulation, but now I don't see the convergence plots anywhere, how do I get them back? I would like to print them.

Also, sometimes I lose my 'messages' box, how to get it back?

Any ideas here? Thanks!

Ray.

3 Replies Last Post Jun 15, 2012, 10:37 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 15, 2012, 7:26 a.m. EDT
hello

the convergence plots and values are not saved, so I do not believe you can retrieve them once COMSOL is closed.
But you still have the log list in the solver node, so you can cut and pat that into EXCEL and find some data back, needs some sorting though.

If you make a probe, this will be saved (until you do a (clear and/or) update all

--
Good luck
Ivar
hello the convergence plots and values are not saved, so I do not believe you can retrieve them once COMSOL is closed. But you still have the log list in the solver node, so you can cut and pat that into EXCEL and find some data back, needs some sorting though. If you make a probe, this will be saved (until you do a (clear and/or) update all -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 15, 2012, 8:39 a.m. EDT
Thanks Ivar :)

Any ideas on the messages box as well?

Kind regards,

Ray
Thanks Ivar :) Any ideas on the messages box as well? Kind regards, Ray

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 15, 2012, 10:37 a.m. EDT
Hi

but you can get definitive answer if you send a mail to "support" COMSOl is the only entity knowing really the internals, I do not believe they expected that these messages would be used, outside of the simulation moment

--
Good luck
Ivar
Hi but you can get definitive answer if you send a mail to "support" COMSOl is the only entity knowing really the internals, I do not believe they expected that these messages would be used, outside of the simulation moment -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.