Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Slip Velcoity jump (Fluid solid interface)

Posted Jul 2, 2012, 5:37 a.m. EDT MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Computational Fluid Dynamics (CFD) Version 4.2a 0 Replies

Mohamed Zanaty
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,
Is there a way to cosider the velocity jump between the solid and fluid in FSI model. The point is to consdier the rarefaction effect of air (veloctyi slip boundary conditions).
As it is mentioned in FSI equations (velocity of the fluid = velocity of the wall), which doesn't consider the rarefaction effect

Thanks in advance

Kind Regards,
Mohamed
0 Replies Last Post Jul 2, 2012, 5:37 a.m. EDT
COMSOL Moderator

Hello Mohamed Zanaty

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content