Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Domaine not computed
Posted Jul 6, 2012, 6:00 a.m. EDT Low-Frequency Electromagnetics, Mesh, Studies & Solvers Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi !
I have mainly 4 domaines (well 7 but 4 are similar), 2 made of carbon fiber and 2 of air...
I've run the model a lot without problem and this morning the program don't want to compute equation in domaines where there is "air", well on one it does but on the big one it don't want to...
I really don't understand ... And in the log file it seems that some mesh grid are avoid ...
I really need help ! Thank you in advance ;)
Here is the file (to big to use Attach File): rapidshare.com/files/1916909903/carbonN.mph
I have mainly 4 domaines (well 7 but 4 are similar), 2 made of carbon fiber and 2 of air...
I've run the model a lot without problem and this morning the program don't want to compute equation in domaines where there is "air", well on one it does but on the big one it don't want to...
I really don't understand ... And in the log file it seems that some mesh grid are avoid ...
I really need help ! Thank you in advance ;)
Here is the file (to big to use Attach File): rapidshare.com/files/1916909903/carbonN.mph
1 Reply Last Post Jul 6, 2012, 7:18 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi!
Please delete solution (and mesh?) to post it here.
Ralf
Please delete solution (and mesh?) to post it here.
Ralf