Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

topography of surfaces

Posted Jul 8, 2012, 12:57 a.m. EDT 2 Replies

Niloofar Fadaei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi
i'm a chemical engineer and searching in topography of surfaces with comsol,please help me about it.
thanks
2 Replies Last Post Jul 15, 2012, 4:49 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 8, 2012, 4:13 a.m. EDT
Hi

you need to explain a bit more to get some help, many of us are non native english speakers so do your best we will sort it out ;)

--
Good luck
Ivar
Hi you need to explain a bit more to get some help, many of us are non native english speakers so do your best we will sort it out ;) -- Good luck Ivar
Niloofar Fadaei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 15, 2012, 4:49 a.m. EDT
Hi
I gathered some data about surface in Excel,may they be the input in modeling in COMSOL or i need some special functions or equations?
thanks for your attention
Niloofar
Hi I gathered some data about surface in Excel,may they be the input in modeling in COMSOL or i need some special functions or equations? thanks for your attention Niloofar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content