Anechoic and Reverberant Chamber

Please login with a confirmed email address before reporting spam

Hello, somebody knows how to model in comsol an anechoic and reverberant chamber with a plate vibrating inside to evaluate the pressure level inside both the chambers? Thank you in advance!


1 Reply Last Post Jan 14, 2022, 12:20 p.m. EST
Dave Greve Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago Jan 14, 2022, 12:20 p.m. EST

To achieve minimal reflections you can either use the impedance boundary condition (with impedance set to the acoustic impedance of your medium) or (better) use a perfectly matched layer.

To have reverberations set the impedance boundary condition to something other than the medium impedance. Or use the hard wall boundary condition.

To achieve minimal reflections you can either use the impedance boundary condition (with impedance set to the acoustic impedance of your medium) or (better) use a perfectly matched layer. To have reverberations set the impedance boundary condition to something other than the medium impedance. Or use the hard wall boundary condition.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.