Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error in solver

Posted Oct 21, 2012, 12:27 p.m. EDT Studies & Solvers Version 4.2a 4 Replies

Prasanna Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi,
I am modelling a 3d accelerometer in 4.2a version, during simulation i m getting an error like "out of memory during LU factorization" , could anyone pls tel me why i am gettin dis error..
4 Replies Last Post Nov 8, 2012, 12:20 p.m. EST
Shi Shi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 7, 2012, 5:39 a.m. EST
Please see the link below, you will find the reasons.

www.uk.comsol.com/community/forums/general/thread/581/
Please see the link below, you will find the reasons. http://www.uk.comsol.com/community/forums/general/thread/581/
Gollakota Anjani Ravikiran
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 7, 2012, 6:11 a.m. EST
Change the meshing of the grid to normal or coarser which may resolve the issue
Change the meshing of the grid to normal or coarser which may resolve the issue
Prasanna Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 8, 2012, 12:20 p.m. EST
tnx fr ur valuable reply:)
tnx fr ur valuable reply:)
Prasanna Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 8, 2012, 12:20 p.m. EST
tnx:)
tnx:)

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content