Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat Topology optimization

Posted Nov 28, 2024, 9:29 p.m. EST 1 Reply

Rahul Karmankar NITW
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Please suggest, how many variables are used for heat Topology optimization?

-------------------
RahulK
1 Reply Last Post Nov 29, 2024, 2:10 a.m. EST
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago Nov 29, 2024, 2:10 a.m. EST

I have a little bit on the topic with a couple of references that might help. Very basic. https://www.comsol.com/paper/shape-and-topology-optimization-of-loudspeaker-drivers-94111

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
I have a little bit on the topic with a couple of references that might help. Very basic. https://www.comsol.com/paper/shape-and-topology-optimization-of-loudspeaker-drivers-94111

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content