Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Time Simulation of QCM

Hi Everyone,

In this moment, I'm working with a QCM model created by COMSOL that you can see in this link: www.comsol.com/model/thickness-shear-mode-quartz-oscillator-4707
At moment, I'm trying to create a time simulation to compare the mechanical displacement with the time and voltage in electrodes, but when de simulation is finished, the graph shows that the mechanical displacement frequency and voltage signal frequency are diferent. I don't understand that !!

I attach several graphs of two signals

Thanks for the help

Regards

Luis


0 Replies Last Post Feb 11, 2014, 3:49 AM EST
COMSOL Moderator

Hello Luis Carvajal

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.