Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

simpel model of an extruder

Posted Mar 6, 2014, 9:21 a.m. EST Low-Frequency Electromagnetics, Fluid & Heat, Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 0 Replies

Stijn Vercruyssen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

We are struggling with a simpel representation of an extruder. We first want to simulate a rotating rod in an concentric cilinder. The fluid around the rod is water (laminar flow). Later on, we will try to define a single srew extruder. Which physics do we have to use? We tried single-phase flow rotating machinery, but than all the solid phases like the rod and cilinder are dealed as fluids.

thanks for your help!

Chemical Engineering students, KULeuven
0 Replies Last Post Mar 6, 2014, 9:21 a.m. EST
COMSOL Moderator

Hello Stijn Vercruyssen

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content