Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to make EM wave induced currents as a input in Magetic Field module
Posted Apr 1, 2014, 4:29 a.m. EDT Low-Frequency Electromagnetics, RF & Microwave Engineering Version 4.3, Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I want to create a model that a plane EM wave incident to two metallic coils, then there are in phase induced currents in two coils, and there must be the EM force between the two coils. I want to create a 1D graph with incident wave frenquency as x-axis and EM force as y-axis.
I first create a model including EM Wave Module, and then derive the current density of coils. I also know Magnetic Field Module can calculate EM force. The question is how can I put my current result from the EM Wave Module into the Magetic Field module>single turn coil>gap feed>coil current . I create a variable Ia, which's expression is IntegrateOverA(emw.normJ), as a input of coil current. But it seems that Ia is not only including current data but also including frequency data, and it just cannot work. So what I need to do to create a right model.
Thanks
Hello Tenglong Wanghuang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.