Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error "cannot create geometry from incomplete mesh"

Posted May 27, 2014, 8:15 a.m. EDT Fluid & Heat, Computational Fluid Dynamics (CFD), Microfluidics, Geometry, Mesh, Structural Mechanics Version 4.3b, Version 4.4 0 Replies

Tim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am using the fsi module with a 2d geometry, its a circle in a laminar flow.
Everything goes fine for the first 0.5s oft the simulation, but after the 45th automatic remeshing the error "cannot create geometry from incomplete mesh" appears.

Does anyone know how to handle this error, or can anyone tell me what it means exactly?

Thank You in Advance,
Tim.
0 Replies Last Post May 27, 2014, 8:15 a.m. EDT
COMSOL Moderator

Hello Tim

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content