Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

moving laser

Posted Jun 9, 2010, 1:48 a.m. EDT 6 Replies

yogesh chukewad
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi,

I am beginner.
I want to simulate a model in which a plate is heated by moving laser (not a point heat source).
please help me giving some clue........

thanks in advance...........!
6 Replies Last Post Mar 13, 2011, 2:21 p.m. EDT
COMSOL Moderator

Hello yogesh chukewad

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Emily Mount
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Jul 9, 2010, 1:09 p.m. EDT
I know how to model laser heating, but I don't know how to specify that the beam is gaussian rather than a point.
I know how to model laser heating, but I don't know how to specify that the beam is gaussian rather than a point.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Jul 11, 2010, 4:01 a.m. EDT
Hi

simply replace your input field I0[W/m^2] by an expresion of "x", or x" and "y" in 2D.
à la

I0*exp((x-X0)^2+(y-Y0)^2/sig^2).

Where X0, Y0 is the cntre of you gaussian beam

Or whatever other expression that fits your need

Good luck
Ivar
Hi simply replace your input field I0[W/m^2] by an expresion of "x", or x" and "y" in 2D. à la I0*exp((x-X0)^2+(y-Y0)^2/sig^2). Where X0, Y0 is the cntre of you gaussian beam Or whatever other expression that fits your need Good luck Ivar
Hitesh Vora
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Aug 18, 2010, 2:56 p.m. EDT
Emily:

I'm trying to model the laser heating with moving in a line with some velocity. I do not know how to model it can you please guide me? I'm a pretty new user of COMSOL.

Thanks,
Hitesh
Emily: I'm trying to model the laser heating with moving in a line with some velocity. I do not know how to model it can you please guide me? I'm a pretty new user of COMSOL. Thanks, Hitesh
Hitesh Vora
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 1, 2011, 6:04 p.m. EST
Emily:

I'm trying to model the laser heating with moving in a line with some velocity. I do not know how to model it can you please guide me? I'm a pretty new user of COMSOL.

Thanks,
Hitesh

Hitesh
Emily: I'm trying to model the laser heating with moving in a line with some velocity. I do not know how to model it can you please guide me? I'm a pretty new user of COMSOL. Thanks, Hitesh Hitesh
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 2, 2011, 2:38 a.m. EST
Hi

have you tried a search on the FORUM AND on the KB ?

and have you looked at this one, it should give you some ideas, no ?

www.comsol.eu/community/forums/general/thread/14090/

--
Good luck
Ivar
Hi have you tried a search on the FORUM AND on the KB ? and have you looked at this one, it should give you some ideas, no ? http://www.comsol.eu/community/forums/general/thread/14090/ -- Good luck Ivar
yogesh chukewad
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 13, 2011, 2:21 p.m. EDT
dear hitesh,

You just have to replace x0 by v*t in the above expression stated by Mr. Ivar.
Still if u find some difficulty doing it, u can mail me at yogesh.chukewad@gmail.com...

regards,
yogesh
dear hitesh, You just have to replace x0 by v*t in the above expression stated by Mr. Ivar. Still if u find some difficulty doing it, u can mail me at yogesh.chukewad@gmail.com... regards, yogesh

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content