Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

gmaw weld

Posted Nov 8, 2009, 6:31 p.m. EST Version 5.1 8 Replies

Cecilia Lucio
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

were can I find more information about arc welding simulation in comsol?
Thanks
8 Replies Last Post Jun 23, 2016, 9:54 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Nov 9, 2009, 6:06 a.m. EST
Hi

there is a nice simulation of moving laser welding/heating, either in the models, or in one of the conference CD's, but I would not call it "arc", in the sense AC/DC or RF application mode.

But its a nice example

Good luck
Ivar
Hi there is a nice simulation of moving laser welding/heating, either in the models, or in one of the conference CD's, but I would not call it "arc", in the sense AC/DC or RF application mode. But its a nice example Good luck Ivar
Niklas Malmberg
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Nov 9, 2009, 11:01 p.m. EST
Welcome to the world of welding with comsol :)
I might have some papers about your subject. What is it more specific you want to model? The arc, the penetration or something else?
Welcome to the world of welding with comsol :) I might have some papers about your subject. What is it more specific you want to model? The arc, the penetration or something else?
Cecilia Lucio
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Nov 14, 2009, 4:31 p.m. EST
I want to simulate the welding distortion of an assembly using the heat transfer module.
I want to simulate the welding distortion of an assembly using the heat transfer module.
Nicolás Farfán
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago Nov 30, 2009, 11:31 a.m. EST
I need information about the modeling of arc welding, please!

my email: nfarfan@gmail.com

thanks!
I need information about the modeling of arc welding, please! my email: nfarfan@gmail.com thanks!
Sankaranarayanan Raman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 10, 2011, 9:26 a.m. EST
I am working on modeling the TIG welding too. . Will be really helpful if i could get some ideaas. . thanks in advance. . :)
I am working on modeling the TIG welding too. . Will be really helpful if i could get some ideaas. . thanks in advance. . :)
Jawad Saleem
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 24, 2011, 8:51 a.m. EDT
i am working on spot welding of any help required
i am working on spot welding of any help required
Jawad Saleem
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 15, 2012, 4:45 a.m. EDT
hi i am also working on spot welding may be we can have good discussions you are welcome to contact
hi i am also working on spot welding may be we can have good discussions you are welcome to contact
佳 刘
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Jun 23, 2016, 9:54 p.m. EDT
i am working on argon weld arc and need some help，Hope you give some sample ，thanks！my email is M201470791@hust.edu.cn
i am working on argon weld arc and need some help，Hope you give some sample ，thanks！my email is M201470791@hust.edu.cn

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content