Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to derive a dispersion curve in COMSOL3.5a

Posted Apr 12, 2011, 11:10 p.m. EDT RF & Microwave Engineering, Results & Visualization, Studies & Solvers Version 3.5a 0 Replies

Lei Fan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

I have built an air-core photonic crystal fiber, using MODE-ANALYSIS---ENGENVALUE, i got good result.

Now, I try to change lambda0_rfwv and get a list of effective mode index with it. So, I set a range of lambda0_rfwv in parametric sweep, then I ran MODE-ANALYSIS---ENGENVALUE again, I didn't find any change. This might be a very easy question for most people, could anyone tell me how could I get a plot of Effective Mode Index versus Lambda0_rfwv( Dispersion Curse )?

Thanks

Lei

0 Replies Last Post Apr 12, 2011, 11:10 p.m. EDT
COMSOL Moderator

Hello Lei Fan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content