Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Flux Variables
Posted Apr 9, 2019, 8:29 p.m. EDT Interfacing, Heat Transfer & Phase Change Version 5.3a 0 Replies
Please login with a confirmed email address before reporting spam
Hi community,
I would to know the differents concepts of flux variables. For example, what is the difference between "normal total heat flux" (32.701 W/m) and "internal normal conductive heat flux, downside" (5.0 W/m)? And, aswell as "internal normal total energy flux, downside" (5.0 W/m) and "internal normal total flux, downside" (5.0 W/m)? In the diagram adjointed, the central part has an imput heated source of 5W and the lateral an input of 8W. Also, heat flux in the external laterals boundaries are considered and initial temperature conditions... The values in () are the obteneidte after the simulation. Considering Line Integration. The diagram is a consideration of an apparatus based on the norms ASTM C177 and ASTM C1073.
If you have similar works, please share with me! Best regards,
Attachments:
Hello Mc Joshua Miguel Piñas Moya
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.