Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Implement function in Type field

Posted Jul 17, 2019, 8:26 a.m. EDT Heat Transfer & Phase Change, Heat Transfer, Parameters, Variables, & Functions 0 Replies

Emir Iljazi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

i have a question about my problem. It is a Iron block with an hole (borehole). On the inside of the borehole i want to heat the block with the "boundary heat source --> heat rate" function. It works for all the surface (uniformly). But now i want to try to heat the surface with the interpolation function (already done with excel for e.g and import in comsol.) or piecewise. The total heat have to be 92W. The field is always yellow. Maybe anyone have an advice or the solution.

Thankfully

Emir Iljazi

0 Replies Last Post Jul 17, 2019, 8:26 a.m. EDT
COMSOL Moderator

Hello Emir Iljazi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content