Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

parallel plate capacitor electrode resistance

Posted Aug 9, 2021, 11:27 a.m. EDT Electromagnetics, Low-Frequency Electromagnetics Version 5.6 1 Reply

Yongping Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

is comsol able to simulation the electrode resistance(equivalent series resistance) of a parallel plate capacitor? i don't know how to ger started. can anyone help me?

1 Reply Last Post Aug 9, 2021, 11:43 a.m. EDT
Dave Greve Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Aug 9, 2021, 11:43 a.m. EDT
  1. In general, the answer is yes.
  2. How to do it- it depends on the physical mechanism for the loss. What is the physical configuration and materials used in the capacitor? Does the loss arise from ohmic losses in the electrodes or some other cause? etc.

The recommended starting point is working through relevant tutorials and looking for related examples on the Comsol website.

1. In general, the answer is yes. 2. How to do it- it depends on the physical mechanism for the loss. What is the physical configuration and materials used in the capacitor? Does the loss arise from ohmic losses in the electrodes or some other cause? etc. The recommended starting point is working through relevant tutorials and looking for related examples on the Comsol website.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content