Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Plot in COMSOL

Please login with a confirmed email address before reporting spam

Hi, i have a simple question, im work in Solid Mechanics.
My model consists of a cube, apply a force per unit area on one side (face load). Using frequencies of 100 to 2000 [Hz]. According to the theory, each point will have an equation of motion X (x, y, z, t) = Xo (x, y, z) sin (wt + phase).
When I get the results, the graph of COMSOL is Xo (x, y, z)? O is a snapshot at any time to? To that value?

Sorry, my level of english is low.

1 Reply Last Post Jun 26, 2012, 1:52 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 26, 2012, 1:52 a.m. EDT
Hi

first in structural learn to understand the sublimities of (x,y,z) (X,Y,Z) and (u,v,w) (check the doc carefully)
Then you must tell us which solver: time series full inertia terms or quasi static or frequency response with a harmonic development ?

and if its u,v,w you are looking at it at a given time t if you are in time stepping (you define that in the plot node) or at a frequency f (then its the amplitude).

note that you do not get complex displacements if you do not add some damping (sub node to linear material)

--
Good luck
Ivar
Hi first in structural learn to understand the sublimities of (x,y,z) (X,Y,Z) and (u,v,w) (check the doc carefully) Then you must tell us which solver: time series full inertia terms or quasi static or frequency response with a harmonic development ? and if its u,v,w you are looking at it at a given time t if you are in time stepping (you define that in the plot node) or at a frequency f (then its the amplitude). note that you do not get complex displacements if you do not add some damping (sub node to linear material) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.