How to set maximum substance deposition in electrochemistry module?

Please login with a confirmed email address before reporting spam

I recently read the article Modelling the Molten Salt Electrorefining Process for Spent Metal Fuel Using COMSOL. This article used 'secondary current distribution' and 'transport of the diluted species'.

U and Pu were dissolved from the Cd anode, into the molten salt and deposited at the solid cathode, as shown in Figure 6, where U was fully deposited and Pu began to be deposited at approximately 50h.

The authors seem to have set a maximum amount of U and Pu to be deposited and would like to know how this should be achieved in COMSOL? Thank you all very much!

FIG. 6. Deposition histories of uranium and plutonium on the solid cathode - model validation with experimental data (Citation1).


Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.