Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Parametric Scan

Posted Nov 16, 2025, 2:56 a.m. EST Results & Visualization, Studies & Solvers, Modeling Workflow Version 6.3 1 Reply

志森 郑
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to perform a parametric scan on three parameters a, b, and c. a scans from 0 to 30 with a step of 1. After a reaches 30, b starts scanning from 0 to 30 with a step of 1. After b reaches 30, c starts scanning from 0 to 30 with a step of 1.

1 Reply Last Post Nov 16, 2025, 12:03 p.m. EST
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 months ago Nov 16, 2025, 12:03 p.m. EST
Updated: 7 months ago Nov 16, 2025, 12:03 p.m. EST

You can set up a scan with specified combinations. Here an example from 0 to 3 instead of 30.

a 0 1 2 3 3 3 3 3 3 3

b 0 0 0 0 1 2 3 3 3 3

c 0 0 0 0 0 0 0 1 2 3

Modify according to your requirements.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You can set up a scan with specified combinations. Here an example from 0 to 3 instead of 30. a 0 1 2 3 3 3 3 3 3 3 b 0 0 0 0 1 2 3 3 3 3 c 0 0 0 0 0 0 0 1 2 3 Modify according to your requirements. Cheers Edgar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content

LinkedIn
Instagram
X