Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Difficulty in simulating simple H-Cell
Posted Mar 19, 2014, 12:03 a.m. EDT MEMS & Nanotechnology, Fluid & Heat, Heat Transfer & Phase Change, MEMS & Piezoelectric Devices, Computational Fluid Dynamics (CFD), Microfluidics, Chemical Reaction Engineering, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I m new to comsol. I started to design a very simple H-cell as demonstrated in Video
www.comsol.com/video/video-239
But when I try to simulate i get this error:
Failed to find a solution.
Maximum number of Newton iterations reached.
Returned solution has not converged.
Can anyone help me in this regard..I did exactly the same way as demonstrated in video.Pls help
Regards
Yousuf
Hello Mohamed Yousuf
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.