Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat Transfer

Posted May 6, 2014, 7:18 a.m. EDT Heat Transfer & Phase Change, Materials, Mesh, Studies & Solvers Version 4.1, Version 4.2, Version 4.3b 0 Replies

Guilherme Gui
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello

I'm a student on the project, and I'm messing in COMSOL 4.0 a short time and have no notion of "heat transfer", I need to get the temperature to stabilize so you can compare with the real model!
We apply a certain power and determine how long it will work, but as time increases the temperature to stabilize her investment keeps rising gradually not getting any results!
Material I am using is to dispel "Al" and the power part'm using "Tin"!
If someone can help me be grateful, and what commands I can use to stabilize the material the right power exercised

Thank you!
0 Replies Last Post May 6, 2014, 7:18 a.m. EDT
COMSOL Moderator

Hello Guilherme Gui

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content