Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulation of Ultrasonic Shot Pulse - pressure measurement

Posted Jun 12, 2010, 12:47 p.m. EDT 0 Replies

Mohd Hafiz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I would like have some opinion. In the picture (attachment), shows a 1.136MHz (Pressure = 1 Pa) radiated through a gas bubble.

Actually i wanted to monitor a shot pulse (1 or 2 cycles) of ultrasonic pressure and measure the pressure after penetrating a gas bubble (to observe the attenuation). Do you have any idea how do i achieve that? seems that in the picture, i radiated continuos pulses. I done my analysis in time harmonic.

Thank you,

hafiz

Attachments:

0 Replies Last Post Jun 12, 2010, 12:47 p.m. EDT
COMSOL Moderator

Hello Mohd Hafiz

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content