Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modal analysis of a membrane
Posted Aug 19, 2015, 6:32 p.m. EDT Acoustics & Vibrations, Structural Mechanics 0 Replies
Please login with a confirmed email address before reporting spam
I am interested in finding mode shapes for a membrane and also its frequency response.
I went about two ways, first i just just the solid mechanics module to check out the mode shapes for a frequency domain say 1-5 kHz.
second, i had the same geometry but used acoustic structural interaction module and found out frequency response at a point certain distance away from the membrane.
The anomaly that i saw was the mode shapes in both these analysis were different.In the first one it was symmetric but in the second it wasn't.
Shouldn't the mode shapes be the same?
Hello Sandesh Gopinath
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.