Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Multiphysics modeling with structural mechanics

Please login with a confirmed email address before reporting spam

Dear all,
I have mutiphysics problem coupling with structrual mechanics.
Basically, orginal mesh is deformed by mechanical force solved by structural mechanics and
based on the deformed mesh (not original mesh) the mass conservation and momentum conservation
problem(Chemical engineering module) has to be solved.

In this case, if I set the boundary conditions for conservation equations at the undeformed boundary,
the same conditions would be applied to the deformed boundary too with time? (I'm solving Time dependent problem)
I need to keep boundary condition constant regardless of deformation.

It would be very appreciated if you could give me some hints.

Thank you.
Yoon

0 Replies Last Post Jun 30, 2009, 10:53 AM EDT
COMSOL Moderator

Hello Wonseok Yoon

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.