System Requirements: 5.5 Interfacing Product Suite
CAD Import Module and Design Module
|Windows® 7, Windows® 8.1, and Windows® 101,2
|macOS 10.13, 10.14, and 10.151,2
|OS-specific system requirements only1,2
1File import of the NX™ file format is available only on a supported Windows® or Linux® operating system.
2File import of the AutoCAD®, Inventor®, and SOLIDWORKS® file formats is available only on a supported Windows® operating system.
For a list of supported file formats for CAD file import and export, see the CAD Specification Chart.
LiveLink™ Products for CAD Software
The bidirectional interface functionality of the product suite detailed in the table below is available only for Windows® 7, Windows® 8.1, and Windows® 10; except for LiveLink™ for PTC Pro/ENGINEER®, which is available only for Windows® 7. For other included functionality, such as file import and geometric operations, see the CAD Import Module and Design Module table.
|LiveLink™ for AutoCAD®
|AutoCAD® 2019 and 2020
|LiveLink™ for Inventor®
|Inventor® 2019 and 2020; Inventor® Professional 2019 and 2020
|LiveLink™ for PTC Creo Parametric™
|PTC Creo Parametric™ 3.0 1, 4.0, 5.0, and 6.0
|LiveLink™ for PTC Pro/ENGINEER®
|PTC Pro/ENGINEER® Wildfire® 4.0 and 5.0, and PTC Creo® Elements Pro 5.0
|LiveLink™ for Revit®
|Revit® 2019 and 2020
|LiveLink™ for Solid Edge®
|Solid Edge® 2019 and 2020
|LiveLink™ for SOLIDWORKS®
|SOLIDWORKS® 2019 and 2020
1Support for PTC Creo Parametric™ 3.0 by the LiveLink™ interface will be removed in the next major release of the COMSOL Multiphysics® software.
File Import for CATIA® V5
The File Import for CATIA® V5 add-on to the CAD Import Module, Design Module, and LiveLink™ products for CAD is only available for Windows® 7, Windows® 8.1, and Windows® 10.
LiveLink™ for Excel®
LiveLink™ for Excel® is compatible with Excel® 2010, 2013, 2016 and 2019 on the Windows® operating system. Excel® 2010 Starter is not supported. If using Office 365, Excel® must be installed on the computer — LiveLink™ for Excel® requires a version of Excel that supports VSTO add-ins.
LiveLink™ for MATLAB®
LiveLink™ for MATLAB® is compatible with MATLAB® R2019a and R2019b on all supported operating systems. For Linux® operating system, the programs
csh are required.
Note: This information is provided for your benefit, but should not be used as a substitute for your own investigation of the system requirements that may be appropriate for your use of COMSOL® software or other software, given your particular circumstances. Systems and hardware change regularly, which may impact any determination of what system requirements are appropriate for you.
Autodesk, the Autodesk logo, AutoCAD, Inventor, and Revit are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. CATIA is a registered trademark of Dassault Systèmes or its subsidiaries in the US and/or other countries. Linux is a registered trademark of Linus Torvalds in the U.S. and other countries. macOS is a trademark of Apple Inc., in the U.S. and other countries. MATLAB is a registered trademark of The MathWorks, Inc. Microsoft, Excel, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. NX is a trademark or registered trademark of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. PTC, Creo, Creo Parametric, Pro/ENGINEER, and Wildfire are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the U.S. and in other countries. SOLIDWORKS is a registered trademark of Dassault Systèmes SolidWorks Corp. COMSOL AB and its subsidiaries and products are not affiliated with, endorsed by, sponsored by, or supported by these trademark owners.