System Requirements: Interfacing Products for Version 6.1
CAD Import Module and Design Module
File import of the NX™ file format is available only on a supported Windows® or Linux® operating system. File import of the AutoCAD®, Inventor®, and SOLIDWORKS® file formats is available only on a supported Windows® operating system.
|Operating System||Supported Version|
|Windows®||Windows® 7 SP1,1 Windows® 8.1, Windows® 10, and Windows® 11|
|macOS||macOS 10.14, 10.15, 11,2 and 122|
|Linux®||OS-specific system requirements only|
1 File import of the AutoCAD® 2023, Inventor® 2023, NX™ 2206, and PTC Creo Parametric™ 9.0 file format versions is not available on Windows® 7.
2 File import of the ACIS, IGES, PTC Creo Parametric™, PTC Creo® Elements Pro, STEP, and PTC Pro/ENGINEER® file formats on macOS 11 and 12 with Apple silicon processors like M1 requires Rosetta 2.
For a list of supported file formats for CAD file import and export, see the CAD Specification Chart.
LiveLink™ Products for CAD Software
The bidirectional interface functionality of the product suite detailed in the table below is available only for Windows® 7, Windows® 8.1, Windows® 10, and Windows® 11 — except for LiveLink™ for PTC Pro/ENGINEER®, which is available only for Windows® 7. Synchronization in offline mode is available on all supported Windows®, Linux®, and macOS operating systems. For other included functionality, such as file import and geometric operations, see the CAD Import Module and Design Module table above.
|LiveLink™ for AutoCAD®||AutoCAD® 2022 and 2023|
|LiveLink™ for Inventor®||Inventor® 2022 and 2023
Inventor® Professional 2022 and 2023
|LiveLink™ for PTC Creo Parametric™||PTC Creo Parametric™ 7.0, 8.0, and 9.0|
|LiveLink™ for PTC Pro/ENGINEER®||PTC Pro/ENGINEER® Wildfire® 4.0 and 5.0
PTC Creo® Elements Pro 5.0
|LiveLink™ for Revit®||Revit® 2022 and 2023|
|LiveLink™ for Solid Edge®||Solid Edge® 2021 and 2022|
|LiveLink™ for SOLIDWORKS®||SOLIDWORKS® 2021–2023|
File Import for CATIA® V5
The File Import for CATIA® V5 add-on to the CAD Import Module, Design Module, and LiveLink™ products for CAD is only available for Windows® 8.1, Windows® 10, and Windows® 11.
LiveLink™ for Excel®
An Excel® installation is not required for reading and writing Excel files. LiveLink™ for Excel® offers additional features when Excel® is installed on the Windows® operating system. LiveLink™ for Excel® is compatible with Excel® 2010, 2013, 2016, 2019, and 2021 on the Windows® operating system. Excel® 2010 Starter is not supported. If using Office 365, Excel® must be installed on the computer — LiveLink™ for Excel® requires a version of Excel that supports VSTO add-ins.
LiveLink™ for MATLAB®
LiveLink™ for MATLAB® is compatible with MATLAB® R2022a and R2022b on all supported operating systems. For Linux® operating systems, the xterm and csh programs are required. For macOS operating systems, the XQuartz and csh programs are required.
LiveLink™ for Simulink®
LiveLink™ for Simulink® is compatible with Simulink® R2022a and R2022b on all supported operating systems. For Linux® operating systems, the xterm program is required. For macOS operating systems, the XQuartz program is required.
Note: This information is provided for your benefit, but should not be used as a substitute for your own investigation of the system requirements that may be appropriate for your use of COMSOL® software or other software, given your particular circumstances. Systems and hardware change regularly, which may impact any determination of which system requirements are appropriate for you.
Autodesk, the Autodesk logo, AutoCAD, Inventor, and Revit are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. CATIA is a registered trademark of Dassault Systèmes or its subsidiaries in the US and/or other countries. Linux is a registered trademark of Linus Torvalds in the U.S. and other countries. macOS is a trademark of Apple Inc., in the U.S. and other countries. MATLAB and Simulink are registered trademarks of The MathWorks, Inc. Microsoft, Excel, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. NX is a trademark or registered trademark of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. PTC, Creo, Creo Parametric, Pro/ENGINEER, and Wildfire are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the U.S. and in other countries. SOLIDWORKS is a registered trademark of Dassault Systèmes SolidWorks Corp. COMSOL AB and its subsidiaries and products are not affiliated with, endorsed by, sponsored by, or supported by these trademark owners.